A boiling water tap is a type of tap that provides you with an endless supply of hot water. You have to install a boiling water tap before you can enjoy its benefits.
Installing a boiling water tap is a relatively easy process, as it only requires you to connect the hot and cold feeds from your cylinder or other source to the tap.
You can fit a boiling water tap yourself if you are confident about handling the tools required for the job, or you can ask an expert plumber to do it for you if you don’t have the knowledge and experience of doing it on your own.
Types of Boiling Water Tap
Some faucets need new holes to be drilled into your worktop for the kitchen. Other options, such as this one, are direct replacements for your current sink unit. There are a variety of options for installation, depending on the manufacturer. Some clients want one of their employees to install it, while others come as a package deal of DIY kits. There are several different types of tap on the market. Various manufacturers offer various versions of tap. The majority of the features will be grouped into one of the above categories, although each manufacturer may make minor modifications. Some taps will need to be relocated in order to make way for new holes in the wall and sink.
Before installing your instant boiling tap, make sure that you have all the tools, fittings, and materials that are required for the job.
Tools Required
To fit a boiling hot tap, you will be using basic plumbing tools such as spanners, screwdrivers, multimeter, files, hacksaw. A drop sheet to cover the floor is also necessary while fitting the tap on your sink or countertop. You can use a blow torch if you need to solder the pipe.
Besides these, have a clear idea about where you want to fit your boiling water tap and what type of tap you want to install. In addition, it is also important that you familiarize yourself with the instructions included in the kit before starting to install your instant boiling water tap.
Materials Required
When you are at the shop, collect all the materials that you will require to install your boiling water tap. These include fittings like connector joints and British standard unions; British standard tap connectors; pipe insulation; flexible hoses; screws, washers, nuts; drain tailpiece; copper tape or sleeve for existing metal piping. You will also need a tap kit, which is specially designed to fit on the sink or countertop.
You will also require a step-down pipe if you are using a lower water pressure to feed your boiling hot plate.
Steps involved in Installing a Boiling Water Tap
Here are the steps that you need to follow for fitting a boiling water tap:
Step 1: Turn off the cold water feed under your sink.
Step 2: Secure the copper pipe running to the tap with a strap, which will provide support while you are fitting the tap. You can use some large-sized cable ties if they are long enough to hold the tube in place.
Step 3: Now mount your instant boiling water tap in place. You can use the rubber gasket to prevent leaks when fitting the tap on your sink.
Step 4: Turn on the cold water supply and open your stop valve, then flush out any dirt or debris that has settled inside the pipe before you start connecting it with other fittings. You should allow all air to escape from the system before connecting it.
Step 5: Bend open the pipe and cut it to size with a hacksaw if necessary, then glue each segment of the piping together using a solvent-based adhesive.
Step 6: Apply a thin bead of PTFE or Teflon tape on each fitting or connector joint that you have connected to the pipe to ensure that it doesn’t leak.
Step 7: Now connect the cold water feed to the tap; tighten each of its connectors using a wrench or spanner while ensuring that they don’t leak. Close your stop valve and turn on the water supply after checking if there is any leakage.
Please keep in mind that you should not need to use a blow torch for soldering if you have enough copper piping.
Is boiling water safe?
Water faucets are operated by a safety knob that you twist while using them. When the tap runs dry, the water shuts off. You’ve just forgotten to turn off the water when you were finished. All are insulated, so they don’t get hot when you touch them. These devices prevent boiling water from seeping into the water and stopping any water from leaking away.
Water heaters use a lower water pressure than normal hot and cold water faucets. The majority of individuals who are considering buying a tap for the first time have concerns about water purity. Water burns are the most difficult to avoid since they are caused by accidental contact with hot water. The controls that have been put in place to reduce the risk of this happening are quite effective.
Are Boiling Water Taps Economical?
Most homes have a hot water heating system, thus they are more energy-efficient than other types of systems. The majority of individuals add more water to a kettle than it actually takes.
Because of this, a kettle requires more than one watt of power to boil water. If you’ve boiled more water than you need, the extra water is pushed out of the sink and reheated.
If you have a low-rate energy source, this might be an economical option. The boiling water tap may not be the best alternative for everyone since it is more costly than other types of systems.
The instant hot water system needs to be repaired every so often. This will guarantee that you have hot water for drinking and cooking when you need it.
Conclusion
When you are installing an instant boiling water tap, you have to make sure that all the joints are airtight. This can be done by using special fittings made for connecting pipes together.
If the installation is not done properly, it will cause leakage and reduce the efficiency of the system.